| DC voltage |
600.0 mV to 1000 V, 5 ranges, basic accuracy: ±0.15% rdg. ±2 dgt. |
| AC voltage: 40~500Hz |
6.000 V to 1000 V, 4 ranges, frequency response: 40 Hz to 1 kHz
Basic accuracy 40 Hz - 500 Hz: ±0.9% rdg. ±3 dgt. (True RMS value, crest factor below 3) |
| DC + AC voltage |
6.000 V to 1000 V, 4 ranges, frequency response: DC, 40 Hz to 1 kHz
Basic accuracy DC, 40 Hz - 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS value, crest factor below 3) |
| LoZ V |
600.0 V, 1-range range, frequency response: DC, 40 Hz to 1 kHz
Basic accuracy DC, 40 Hz - 500 Hz: ±1.0% rdg. ±13 dgt. (True RMS value, crest factor below 3) |
| Resistance |
600.0 Ω to 60.00 MΩ, 6 ranges, basic accuracy: ±0.7% rdg. ±3 dgt. |
| Direct current |
600.0 mA to 10.00 A, 3 ranges, basic accuracy: ±0.5% rdg. ±3 dgt. |
| AC current |
600.0 mA to 10.00 A, 3 ranges, basic accuracy 40 Hz - 500 Hz: ± 1.4% rdg. ±3 dgt. (True RMS value, crest factor below 3) Frequency
characteristics: 40 Hz to 1 kHz |
| AC current (measured by AC clamp probe) |
10.00 A to 1000 A, 7 ranges, basic accuracy 40 Hz - 500 Hz: ±0.9% rdg. ±3 dgt. Calculate the measurement accuracy of the clamp probe
(true RMS value, crest factor below 3) |
| Capacitive coupling |
1.000 μF to 10.00 mF, 5 ranges, basic accuracy: ±1.9% rdg. ±5 dgt. |
| Continuity check |
Conduction ON threshold: 25 Ω, conduction OFF threshold: 245 Ω, response time: above 0.5 ms |
| Diode testing |
Open circuit voltage: below 2.0 V, test current: 0.2 mA, clockwise threshold: 0.15 V to 1.8 V |
| Voltage frequency |
99.99 Hz to 99.99 kHz, 4 ranges (depending on minimum sensitivity voltage)
Basic accuracy: ±0.1% rdg. ±1 dgt. |
| Current frequency |
99.99 Hz~9.999 kHz, 3 ranges (depending on minimum sensitivity current)
Basic accuracy: ±0.1% rdg. ±1 dgt. |
| Harmonics |
[When installing the Z3210] Harmonic level/content/total harmonic distortion in current can be measured up to 30
times * Can be displayed via application software (GENNECT Cross). |
| Other features |
Accidental insertion prevention function, fuse check function, user hold settings, filtering function, automatic zero adjustment, display value hold, auto hold, maximum/minimum value display, transient value (PEAK) display, auto power saving, USB communication (only when the optional communication package DT4900-01 is installed), wireless communication (only when the optional wireless adapter Z3210 is installed) |
| Display |
4-digit LCD display, max. 6000 dgt. (divided by frequency measurement), bar chart |
| Displays the update rate |
5 times/s (Capacitive coupling: based on measured values 0.05 to 5 times/s, frequency: 1~2 times/s) |
| Power supply |
AA alkaline battery (LR6) *3, continuous usage time: 130 h (without Z3210), 70 h (with Z3210 installed, wireless communication) |
| Volume and weight |
87W * 185H * 47D mm, 480g (including test line support and battery) |
| Attachment |
Test Cable L9300 *1, User Manual *1, AA Alkaline Battery (LR6) *3, Precautions for Use *1 |
