| Feature |
Code |
Description |
| Model |
STR82D |
SmartLine Pressure Transmitter with Remote Diaphragm Seals |
| Number of Seals |
1 |
1 Remote Seal (High Side) |
| Primary Fill Fluid (Meter body) |
1 |
Silicone Oil 200 |
| Dual Head DP |
D |
316 SS for Close-Couple |
| Bolts and Nuts for Transmitter Heads |
S |
316 SS Bolts and Nuts |
| Secondary Fill Fluid (capillary & seal) |
1 |
Silicone Oil 200 |
| Connection of Remote Seal to Meter Body |
2 |
2 inch long SS nipple close-coupled |
| Seal Option |
0 |
None |
| Flush Flanged Seal with Lower |
AFC |
Diaphragm Diameter: 3.5"
Flange Size: 3"
Flange Pressure Rating(1): ANSI 300 |
| Wetted Material |
AA |
Diaphragm: 316L SS
Upper Insert: 316L SS |
| Non-Wetted Material (upper, upper insert) |
2 |
316L SS |
| Seal-Capillary Connection |
1 |
Center Seal |
| Calibration Rings |
B |
316L SS |
| Flushing Connection and Plugs(2) |
S |
Two 1/2" with metal plugs |
| Approvals |
C |
ATEX Explosion proof, Intrinsically Safe & Non-incendive |
| Electronic Housing Material & Connection Type |
C |
Material: Polyester Powder Coated Aluminum
Connection: 1/2 NPT
Lightning Protection: Yes |
| Output/ Protocol |
H |
Analog Output: 4-20mA dc
Digital Protocol: HART Protocol |
| Customer Interface Selections |
E |
Indicator: Advanced
Buttons: Yes
Languages: EN,GR,IT, FR,SP,RU, TU |
| Application Software |
1 |
Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings |
1 |
Write Protect: Disabled
Fail Mode: High> 21.0mAdc
High & Low Output Limits(3): Honeywell Std (3.8 - 20.8 mAdc) |
| General Configuration |
C |
Custom Configuration (Unit Data Required from customer) |
| Accuracy and Calibration |
B |
Accuracy: Standard
Calibrated Range: Custom (Unit Data Required)
Calibration Qty: Single Calibration |
| Mounting Bracket |
3 |
Bracket Type: Angle Bracket
Material: Angle Bracket |
| Customer Tag |
1 |
One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
| Unassembled Conduit Plugs & Adapters |
A0 |
No Conduit Plugs or Adapters Required |
| Certifications & Warranty |
F1
TP
FX |
Calibration Test Report & Certificate of Conformance (F3399)
Over-Pressure Leak Test Certificate (1.5X MAWP) (F3392)
EN10204 Type 3.1 Material Traceability (FC33341) |
| Factory |
0000 |
Factory Identification |
